Taking Pictures Continuously Continuous) - FujiFilm FinePix F40fd Owner's Manual

SHOOTING MENU
M
OVER OVER
OVER or UNDER
Example
You can change the white balance for a photographed image
by using colored paper instead of white paper.
MEMO
• In AUTO mode, the correct white balance may not be
achieved for subjects such as close-ups of people's
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance (except for
custom white balance) setting for the flash is used.
Consequently, to achieve a particular effect, the flash
mode should be set to C Suppressed flash (➝p.58).
• The specified custom white balance is retained until it is
reset. This setting is retained even if the battery is
removed.
• The color tones may vary depending on the shooting
conditions (light source, etc.).
• After taking the picture, check the image color (white
balance).
• Explanation of Terms "White Balance" (➝p.163)
76
Downloaded From camera-usermanual.com Fujifilm Manuals
Set the exposure
N N 25 25 25 25
compensation again, using
ISO ISO AUTO(1600) AUTO (1600)
a negative value (–) when
[OVER] appears and a
positive value (+) when
[UNDER] appears (➝p.73).
Taking pictures continuously
( CONTINUOUS)
Use this mode to take pictures of a moving subject.
SHOOTING MENU SHOOTING MENU
EXP. COMPENSATION EXP. COMPENSATION
PHOTOMETRY PHOTOMETRY
WHITE BALANCE WHITE BALANCE
CONTINUOUS CONTINUOUS
AF MODE AF MODE
SET - - UP UP SET
OFF OFF
h: LONG PERIOD continuous shooting
k: FINAL 2 continuous shooting
f: TOP 2 continuous shooting
➝
Setting the menu ( p.66)
AUTO AUTO
LONG PERIOD LONG PERIOD
OFF OFF
FINAL 2 FINAL 2
TOP 2 TOP 2