4.
Optical drive (see
5.
WLAN module (see
6.
Memory module (see
7.
Keyboard (see
Keyboard on page
8.
Top cover (see
Top cover on page
9.
USB board (see
USB board on page
10.
Display assembly (see
11.
Power connector (see
12.
TouchPad LED board (see
Remove the system board:
1.
Disconnect the optical drive connector from the system board (1) .
2.
Remove the Phillips 5.0×2.0 screw (2) that secures the system board to the base enclosure.
Optical drive on page
WLAN module on page
Memory module on page
57)
60)
69)
Display assembly on page
Power connector on page
TouchPad LED board on page
52)
54)
56)
71)
70)
67)
Component replacement procedures
79