FujiFilm FinePix BL00494-200(1) Owner's Manual page 32

PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
H FOCUSING
FOCUSING FOCUSING
: OFF OFF
1 :
: AUTO AUTO
:
2
:
STD STD
: SET SET
6 6
N N
ISO 400 ISO 400 ISO 400
250 F 5.6
N N 6 6
ISO 400 ISO 400 ISO 400
250 F 5.6
250 F 5.6 250 250 F F 5.6 5.6
250 F 5.6 250 250 5.6 5.6
F F
250 F 5.6 5.6 5.6
250 250 F F
62
✽ Displaying the menus (➡P.56)
Available Photography modes: N, M, <, >
Ï AF ( CENTER )
˝ AF ( MULTI )
Ë AF AREA
Ó CONTINUOUS AF
K MF ( Manual Focus )
Ï AF ( CENTER )
The camera focuses on the center of the LCD
monitor. Use this setting when taking pictures using
AF/AE lock (➡P.27).
˝ AF ( MULTI )
Press the shutter button down halfway. The camera
recognizes any strongly contrasting subject near
the center of the LCD monitor and displays the AF
frame over subject in focus.
●
!
When taking pictures in Macro mode, the camera focuses on
the center of the LCD monitor.
You cannot check the focus when taking pictures
using the viewfinder.
After taking the picture, play it back to check the
focus.
For a high-contrast subject in
the center of the LCD monitor
Press the shutter button down halfway. The AF
frame appears positioned on the high-contrast
subject near the center of the image.
When there is no high-contrast subject
in the center of the LCD monitor
When the camera has difficulty focusing on the
subject in "AF (MULTI)" mode, set the FOCUSING
mode to "AF(CENTER)" and use AF/AE Lock
(➡P.27).
1
1 0 0 2
SELECT SELECT AF AREA F AREA
Before moving
After moving
2
N N 6 6
ISO 400 ISO 400 ISO 400
250 F 5.6
Regardless of the AF frame location, the exposure is always set using the area in the center of the
LCD monitor. To expose the shot for your main subject, use AE lock.
N N 6 6
ISO 400 ISO 400 ISO 400
250 F 5.6
◆ ◆
Notes on continuous AF
Because the camera focuses continuously without pressing the shutter button, note the
following:
i The battery level (power consumption) increases because data is being overwritten in the camera's
internal memory.
i If the Auto power off function is set to "OFF", particular attention must be given to the battery level.
Ë AF AREA
The camera changes the focusing position on the
LCD monitor. Use this setting when composing the
shot using a tripod and changing the focusing
position.
1 Press "a", "b", "d" or "c" to move the "
(target point) to the focusing position.
2 Press the "MENU/OK" button to confirm the
setting.
The AF frame appears in the location to which the
target point was moved.
Take the picture in the normal way.
To reposition the AF frame, select " Ë " AF AREA
H
from the " " FOCUSING menu.
Ó CONTINUOUS AF
The camera continues to focus on the main subject
in the AF frame.
Use this mode to take pictures of a moving subject.
●
!
The LCD power save function is disabled in this mode.
Continued
°
"
3
63