FujiFilm FinePix BL00494-200(1) Owner's Manual page 21

M SHUTTER-PRIORITY AUTO
PHOTOGRAPHY FUNCTIONS
N N 6 6
ISO 400 ISO 400 ISO 400
Shutter speed
320 F6.4
◆
The shutter speed and aperture setting display
Overexposed
ISO 400 ISO 400 ISO 400
250 F8
250 F 8
Underexposed
ISO 400 ISO 400 ISO 400
1000 F 2.8
1000 F 2.8
Metering failed
ISO 400 ISO 400 ISO 400
250 F ---
250 F ---
40
M
Set the Mode dial to " ".
This is an automatic mode to set the shutter speed.
Use this mode to freeze a moving subject (fast
shutter speed) or convey the impression of
movement (slow shutter speed).
Setting the shutter speed
Press "a" or "b" to select the shutter speed.
h Shutter speed setting
3 sec. to 1/1000 sec. in 1/3 EV increments
◆
In scenes that are extremely overexposed, the
N N 6 6
aperture setting (F8) appears in red. When this
occurs, select a faster shutter speed (up to 1/1000
sec.).
In scenes that are extremely underexposed, the
N N 6 6
aperture setting (F2.8) appears in red. When this
occurs, select a slower shutter speed (down to 3
sec.).
When the brightness of the subject is outside the
6 6
N N
camera's brightness metering range, "F---" appears
as the aperture setting. When this occurs, press the
shutter button down halfway to measure the light
level again and display a value.
< APERTURE-PRIORITY AUTO
PHOTOGRAPHY FUNCTIONS
Set the Mode dial to "
This is an automatic mode to set the aperture.
Use this mode to have the area in front of and
behind the subject out of focus (large aperture) or
have both near and far subjects in focus (small
aperture).
Press "a" or "b" to select the aperture.
h Aperture settings
N N 6 6
ISO 400 ISO 400 ISO 400
Aperture
320 F 6.4
◆
The shutter speed and aperture setting display
In scenes that are extremely overexposed, the
Overexposed
N N 6 6
shutter speed setting (1/1000 sec.) appears in red.
ISO 400 ISO 400 ISO 400
When this occurs, select a larger number of aperture
(up to F8).
1000 F 2.8
1000 F 2.8
In scenes that are extremely underexposed, the
Underexposed
N N 6 6
shutter speed setting (1/4 sec.) appears in red. When
ISO 400 ISO 400 ISO 400
this occurs, select a smaller number of aperture.
4 F 8
●
!
4 F 8
When the brightness of the subject is outside the
Metering failed
6 6
N N
camera's brightness metering range, "----" appears
ISO 400 ISO 400 ISO 400
as the shutter speed setting. When this occurs, press
the shutter button down halfway to measure the light
level again and display a value.
---- F 2.8
---- F 2.8
<
".
Setting the aperture
Wide-angle: F2.8 to F8 in 1/3 EV increments
Telephoto: F5.6 to F8 in 1/3 EV increments
◆
When Forced flash mode is selected, the slowest available
shutter speed is 1/45 sec.
3
41