FujiFilm FinePix BL00494-200(1) Owner's Manual page 12

BASIC OPERATION GUIDE
(Playback) button
Press the " " button for about 1
second to turn the camera on in
Playback mode.
g button
Photography: d button Turns Macro
( ) on and off.
c button Sets the Flash
( ).
Playback: Change frame or movie frame
advance.
DISP/BACK button
DISP: Press this button to select the
LCD monitor display.
BACK: Press this button to stop a
procedure midway through.
Using the Menus
1Displaying the menu.
Press the "MENU/OK" button.
2Selecting a menu option. 3Selecting an option.
Press the up or down arrow Press the right arrow on the
on the 4-direction button. 4-direction button.
SELF-TIMER SELF-TIMER
: OFF OFF
1 :
: AUTO AUTO OFF OFF
:
2
: STD STD
: SET SET
5Confirming the setting.
Press the "MENU/OK" button.
◆
Displaying the on-screen Help
Instructions for the next step in the procedure
appear at the bottom of the LCD monitor. Press
the button indicated.
In the right side LCD monitor, press the
"MENU/OK" button to erase the displayed frame.
To cancel erasing, press the "DISP/BACK" button.
Up, down, left and right are indicated by black triangles in the Owner's Manual. Up or down is shown
as "a" or "b", and left or right is shown as "d" or "c".
22
Zoom button
Photography: Press " T " to zoom in (telephoto).
Press " W " to zoom out (wide-angle).
Playback: Press " T " to enlarge the image.
Press " W " to revert to normal display.
a /
Erase button
Pressing the "a" button
erases a frame (file).
Photo mode button
Photography: Select the
quality mode, sensitivity and
FinePix COLOR settings.
Playback: Specify the print
order (DPOF) settings.
4Selecting a setting.
Press the up or down arrow
on the 4-direction button.
OFF OFF
: OFF OFF : OFF OFF
1 : 1 :
: AUTO AUTO OFF OFF : AUTO AUTO
: :
2
2
: STD STD : STD STD
: SET SET : SET SET
◆
E R A S E O K ? E R A S E O K ?
Y E S Y E S C A N C E L C A N C E L
Y E S Y E S C A N C E L C A N C E L
PHOTOGRAPHY MODE
1
1 0
2
3
4
10 SEC 10 SEC
OFF OFF
5
A
Zoom bar
TAKING PICTURES ( AUTO MODE )
1 Press the "POWER" button to turn the camera
0 2
on.
2 Set the Mode dial to "
h Focal range
Approx. 60 cm (2.0 ft.) to infinity
●
!
Use Macro mode for subjects closer than 60 cm (2.0 ft.)
(➡P.44).
●
!
When [CARD ERROR], [CARD NOT INITIALIZED], [CARD
FULL] or [NO CARD] appears, see P.122.
Press the Flash pop-up button to pop up the flash.
●
!
When the flash pops up, the image may disappear and go
dark briefly due to flash charging. The viewfinder lamp blinks
orange during charging.
●
!
If the flash is used in dusty conditions or when it is snowing,
white dots may appear in the image due to flash reflecting off
the dust particles or snowflakes. Use Suppressed flash mode
to fix the problem.
Brace your elbows against your sides and hold the
camera with both hands. Position your right thumb
so that it is handy for using the zoom.
●
!
Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to prevent camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
●
!
There may be some uneven brightness at the lower edge of
the LCD monitor. This is normal and does not affect the
photographed image.
Hold the camera so that your fingers or the strap do
not cover the lens and flash. If the lens or flash is
obscured, subjects may be out of focus or the
brightness (exposure) of your shot may be
incorrect.
●
!
Check that the lens is clean. If it is dirty, clean the lens as
informed on P.119.
Press "T" (telephoto) button to zoom in. Press "W"
(wide-angle) button to zoom out. A zoom bar
appears on the LCD monitor.
h Optical zoom focal length
(35 mm camera equivalent)
Approx. 32 mm to 128 mm
N 6
„
( : Approx. 33 mm to 132 mm)
Max. zoom scale: 4×
●
!
See P.95 for information on procedures for using Digital
zoom.
B ".
2
Continued 23