Roaming To Another Network; Using Bluetooth Wireless Devices - HP Pavilion dm1-4200 User Manual

User guide notebook - linux
Hide thumbs Also See for Pavilion dm1-4200:
Table of Contents

Advertisement

Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected
signals. You can use the following precautions to protect your WLAN:
Firewall—Checks both data and requests for data that are sent to your network, and discards
any suspicious items. Firewalls are available in both software and hardware. Some networks use
a combination of both types.
To access the built-in firewall, select Computer > YaST > Security and Users > Firewall, and
then follow the on-screen instructions.
Wireless encryption—Your computer supports three encryption protocols:
Wi-Fi Protected Access (WPA)
Wi-Fi Protected Access II (WPA2)
Wired Equivalent Privacy (WEP)
NOTE:
HP recommends that you select WPA2, which is the most advanced of the three encryption
protocols. The use of WEP encryption is not recommended, because it can be overcome with little
effort.
Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) use security standards to
encrypt and decrypt data transmitted over the network. Both WPA and WPA2 dynamically
generate a new key for every packet, and they also generate a different set of keys for each
computer on the network. To accomplish this:
WPA uses Advanced Encryption Standard (AES) and Temporal Key Integrity Protocol
(TKIP).
WPA2 uses Cipher Block Chaining Message Authentication Code Protocol (CCMP), which
is a new AES protocol.
Wired Equivalent Privacy (WEP) encrypts data with a WEP key before it is transmitted. Without
the correct key, others will not be able to use the WLAN.

Roaming to another network

When you move your computer within range of another WLAN, the operating system attempts to
connect to that network. If the attempt is successful, your computer is automatically connected to the
new network. If the operating system does not recognize the new network, follow the same procedure
you used initially to connect to your WLAN.

Using Bluetooth wireless devices

A Bluetooth device provides short-range wireless communications that replace the physical cable
connections that traditionally link electronic devices such as the following:
Computers
Phones
Audio devices
The strength of Bluetooth is in synchronizing information transfers between your computer and
wireless devices. The inability to consistently connect two or more computers to share the Internet
through Bluetooth is a limitation of Bluetooth and the operating system.
14
Chapter 3 Networking

Advertisement

Table of Contents
loading

Table of Contents