To Install Windows 2000 - HP OmniBook xt6050 - Notebook PC Manual

Installing Windows 2000
Installing Retail Windows 2000
3. Insert the bootable Recovery CD into the CD-ROM/DVD drive.
4. Reboot, press ESC when you see the HP logo.
5. Select the "CD-ROM/DVD Drive" as the boot device.
6. Click Continue.
7. Click Advanced.
8. Select your desired Hibernate Partition Size. (0M HP Preferred Size)
9. Check "Do not load operating system".
10. Select "Hibernate partition only".
11. Click Continue.
12. Click OK.
13. When the message "Hibernate partition successfully created" appears, remove the
Recovery CD.

To install Windows 2000

1. Insert the HP Notebook CD-ROM drive in the HP Notebook.
2. Insert the Windows 2000 CD in the CD-ROM drive.
3. Reboot, press ESC when you see the HP logo.
4. Select the CD-ROM/DVD as the boot device and press Enter.
5. At the Welcome Screen, press Enter to begin.
6. Read the Windows 2000 Licensing Agreement. Press Page Down until you reach the
end of the document. Press F8 to agree.
7. In the list of existing partitions, select the unpartitioned space and press Enter.
8. Highlight your choice of file system (FAT or NTFS), then press Enter. After
formatting and copying files the HP notebook will reboot and continue installation.
9. Click Next to accept the Regional settings or click Customize.
10. Enter your name and organization, then click Next.
11. Enter the Product Key, then click Next. (The Product Key is located on the Certificate
of Authenticity that you received with your retail version of Windows 2000.)
112 Corporate Evaluator's Guide