Using The Remote Control; Installing The Remote Control Batteries - Insignia NS-L47Q09-10A User Manual

Insignia 47" LCD TV
# Button Description
Press to mute the sound. Press again to restore the
9
MUTE
sound.
Press to open the on-screen menu.
10
MENU
Press to move left, right, up, or down in on-screen
11
menus.
Press to confirm selections or changes.
12
OK/ENTER
Press to open the Source List, then press
cycle through the available input sources. For more
13
INPUT
information, see "Selecting the video input source"
on page 15.
Press to select TV as the video source.
14
TV
Press to select the device connected the AV 1
15
Video
VIDEO, AV 2 VIDEO, or S-VIDEO jack.
Press to freeze the video image. Press again to
unfreeze the image. For more information, see
"Freezing the picture" on page17.
16
FREEZE
Caution: Do not freeze the video image for long
periods of time. You may damage the TV screen.
Press to turn closed captioning on or off. You can
select CC Off, CC On, or CC On when Mute. For
17
CCD
more information, see "Viewing closed captioning"
on page 26.
Press to select the video mode. You can select
Vivid, Standard, Energy Savings, Theater,
18
PICT
Sports, or Custom. For more information, see
"Adjusting the TV picture" on page 16.
Press to select the aspect ratio. For more
19 information, see "Adjusting Advanced Video
ZOOM
settings" on page 17.
In TV mode, press to return to the previous channel.
20
RECALL
Press to change TV channels. For more information,
21
CH /CH
see "Selecting a channel" on page 16.
Press to display the program guide. For more
22 information, see "Displaying additional
GUIDE
information" on page 16.
Press to close the on-screen menu.
23
EXIT
Press to display TV status information, such as the
channel number, channel name (if available), or
24
INFO
signal source. For more information, see
"Displaying additional information" on page 16.
Press one or more times to select the device
connected to the HDMI 1, HDMI 2, HDMI 3, or
25
HDMI
HDMI 4 jack.
Press to select the device connected to the
26
COMP
COMPONENT 1 or COMPONENT 2 jacks.

Using the remote control

Installing the remote control batteries

To install the remote control batteries:
1 Remove the battery cover.
or to
2 Insert two AAA batteries into the battery
3 Replace the battery cover.
www.insigniaproducts.com
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
7