Adjusting Advanced Video Settings; Freezing The Picture; Adjusting The Sound - Insignia NS-L47Q09-10A User Manual

Insignia 47" LCD TV
• Advanced Video—Opens the Advanced Video
menu. For more information, see "Adjusting
Advanced Video settings" on page 17.
• Reset Picture Settings—Resets all picture
settings to the factory defaults. When you
select this option, a confirmation box opens.
Press or to select Yes or No, then press
OK/ENTER to confirm.
Note
• You may need to scroll down to see all the
options.
• If you adjust Brightness, Contrast, Color, Tint,
or Sharpness in Vivid, Standard, Energy
Savings, Theater, or Sports mode, your TV
switches to Custom mode automatically.
3 Press or to modify a scale or to move from
left to right to make a choice in a submenu.
Press or to move up or down when
selecting from a list of choices in a submenu.
4 Press MENU to go to the previous menu or EXIT
to close the menu.

Adjusting Advanced Video settings

To adjust advanced video settings:
1 On the Picture menu, press
Advanced Video, then press OK/ENTER or .
The Advanced Video menu opens.
Picture Advanced Video
Aspect Ratio
Overscan
Color Temperature
Backlight
Noise Reduction
Advanced Contrast
OK
MOVE
ENTER
Adjust how the picture fills the screen
2 Press to highlight an option, then press
OK/ENTER to access the sub-menu. You can
select:
• Aspect Ratio—Selects the aspect ratio. You
can select Normal, Zoom, Wide, Cinema, or
Auto. Auto is only available under TV mode
and when Auto Zoom on the Channels menu
is set to On. In VGA mode or HDMI mode when
a computer is connected to the HDMI jack,
only Wide and Normal are available.
• Color temperature—Selects the color
temperature to change the overall color of the
picture. You can select Cool, Normal, or
Warm.
• Backlight—Controls the overall brilliance of
the screen. You can adjust the backlight
through a range of 0~30.
• Noise Reduction—Controls video noise. You
can select Off, Low, Middle, or High.
• Advanced Contrast—When you see the
pop-up menu, set Adaptive Contrast to On to
adjust picture detail and brightness
automatically or set Dynamic Contrast to On
to automatically adjust the contrast between
the light and dark areas of the picture.
or to highlight
PICTURE
AUDIO CHANNELS SETTINGS
Auto
On
Cool
30
Middle
SELECT PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com
3 Press or to modify a scale or to move from
left to right to make a choice in a submenu.
Press or to move up or down when
selecting from a list of choices in a submenu.
4 Press MENU to go to the previous menu or EXIT
to close the menu.

Freezing the picture

To freeze the picture:
• Press FREEZE. Press again to unfreeze the
picture.
Caution
Do not freeze the picture for long periods of time.
You may damage your TV's screen.

Adjusting the sound

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
OK
MOVE
ENTER
Adjust settings to affect picture quality
2 Press or to select AUDIO. The Audio menu
opens.
Audio
Equalizer
Equalizer Mode
Equalizer Setting
Balance
Digital Audio/SPDIF
MTS/SAP
OK
MOVE
ENTER
Adjust settings to affect sound quality
3 Press to highlight Equalizer, then press
OK/ENTER to open the submenu
4 Press or to select On or Off, then press
OK/ENTER to return to the Audio menu.
The Equalizer setting affects other settings you
can adjust.
PICTURE
AUDIO CHANNELS SETTINGS
Vivid
42
45
54
0
+5
SELECT PREVIOUS EXIT
MENU EXIT
AUDIO
PICTURE CHANNELS SETTINGS
On
Standard
0
RAW
Mono
SELECT PREVIOUS EXIT
MENU EXIT
17