I List of Settings
Q Still Photography mode
A AUTO
S MANUAL
LCD BRIGHTNESS (P.71)
SET–UP
I SET–UP Menu Options (Date/time setting, etc.)
Settings
POSTVIEW
POWER SAVE
USB MODE
DATE/TIME
Q
LCD
BEEP F
LOW/HIGH/OFF
ENGLISH/FRANCAIS/
LANGUAGE
RESET ALL
The options available in the settings menus vary depending on the mode, as shown in the table below.
T Movie mode
—
—
LCD BRIGHTNESS (P.71)
SET–UP
Factory
Display
default
ON/OFF
ON
ON/OFF
ON
DSC/PC CAM
DSC
SET
—
ON/OFF
ON
LOW
ENGLISH
DEUTSCH
OK
—
This option specifies whether or not an image checking screen
(photography results) is displayed after you take a shot.
The photographed image is displayed for a few moments and then
automatically recorded.
If the camera is not used for approximately 30 seconds, this function
temporarily switches off the LCD monitor. See P.74 for details.
See P.75 for details.
Use this option to correct the date or time. See P.15 for details.
Use this option to specify whether the LCD monitor is automatically
switched ON or OFF when the Mode dial is set to "Q".
Allows you to set the camera's operating sound.
Select English, French or German as the language used for screen
display.
This resets all the camera settings (including the photography and
playback menu settings) other than DATE/TIME and LANGUAGE to the
factory default values set at shipment.
w Playback mode
—
—
LCD BRIGHTNESS (P.71)
SET–UP
Explanation
5
73