Getting Ready; Loading The Batteries And Xd-Picture Card - FujiFilm FinePix A203 Owner's Manual

1

Getting Ready

Compatible batteries
Use two AA-size alkaline batteries or two AA-
size nickel-metal hydride (Ni-MH) batteries.
N
Notes on Handling Batteries
h It is recommended that you
use the same brand of alka
batteries as those supplied
with the camera.
h Never use a battery when the
outer casing is split or peeling
as this could result in a short-circuit and cause major
problems due to battery fluid leakage or overheating.
h You cannot use lithium, manganese or nickel-
cadmium (Ni-Cd) batteries.
h Do not use different types of batteries or old and new
batteries together.
h The operating lives of alkaline batteries vary between
brands and the life of batteries you purchase may be
shorter than the alkaline batteries provided with the
camera. Note also that due to the nature of alkaline
batteries, the time for which they can be used is
shorter in cold locations (at temperatures of +10°C
(+50°F) or below). Consequently, Ni-MH batteries are
recommended.
h Soil (fingerprints, etc) on the terminals of batteries can
greatly reduce the time for which the batteries provide
power.
h You will need the optional charger (➡ P.106) to
recharge Ni-MH batteries.
h See P.109 for notes on using batteries.

LOADING THE BATTERIES AND xD-Picture Card

N
Outer casing
xD-Picture Card ( sold separately )
DPC-16 (16MB)
DPC-32 (32MB)
Front
G
!
Operation of this camera is only guaranteed when it
is used with FUJIFILM xD-Picture Card.
G
!
See P.112-113 for more information on xD-Picture
Card.
DPC-64 (64MB)
DPC-128 (128MB)
Back
1
11