Agency Compliance; Network Equipment Building Systems (Nebs) Compliance; Usa Federal Communications Commission (Fcc) Statement - Dell Force10 S4810P Manual

Installing the s4820t system
Hide thumbs Also See for Force10 S4810P:
Table of Contents

Advertisement

• 802.3ad Link Aggregation with LACP
• 802.3ae 10 Gigabit Ethernet (10GBASE-X)
• 802.3ba 40 Gigabit Ethernet (40GBase-SR4, 40GBase-CR4) on optical ports
• 802.3u Fast Ethernet (100BASE-TX)
• 802.3x Flow Control
• 802.3z Gigabit Ethernet (1000BASE-X)
• ANSI/TIA-1057 (LLDP-MED)
• Force10 (PVST+)
• MTU (12,000 bytes)

Agency Compliance

Network Equipment Building Systems (NEBS) Compliance

• Use shielded cables for ports 0 - 48. You must ground the shields at both ends.
• Use only reverse airflow configurations in a NEBS-compliant installation.
• Fit the power supplies and fan modules with filter kits. You must replace the fan filters on a regular
basis.
• Use this equipment with an external, second-level 6kV lightning Surge Protective Device (SPD) at the
AC input of the building.
• Use a SPD with the AC power connections in order to protect the AC power supplies from damage from
excessive power line surges.
• In order to comply with the GR-1089 Lightning Criteria for Equipment Interfacing with AC Power
Ports, use a SPD at the AC input of the router.
WARNING: Electrostatic discharge (ESD) damage can occur if components are mishandled. Always wear an
ESD-preventive wrist or heel ground strap when handling the S4820T and its components.

USA Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designated to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy. If it is not installed and used in accordance to the
instructions, it may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case users will be required to take
whatever measures necessary to correct the interference at their own expense.
Specifications
|
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

S4820tForce10 s4820t

Table of Contents