Table of Contents
Advertisement
Speakers
Description
Speaker Kit
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the switch cover and keyboard (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board and remove the speaker cable from the
clips and routing channel.
NOTE:
2.
Remove the four PM2.5×3.0 screws (2) that secure the speakers to the computer.
3.
Remove the speakers (3) from the computer.
Reverse this procedure to install the speakers.
50
Chapter 4 Removal and replacement procedures
Battery on page
The two speakers are connected with a single cable.
42).
Switch cover and keyboard on page
Spare part number
535795-001
43).
Advertisement
Table of Contents
