Use At Dsc Mode - FujiFilm FinePix A200 Owner's Manual

7.2 Use at DSC mode

ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＩＭＡＧＥ ＤＩＳＰＬＡＹ ＩＭＡＧＥ ＤＩＳＰＬＡＹ ＯＦＦ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ ＯＮ
ＵＳＢ ＭＯＤＥ
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
1. Load an xD-Picture Card containing
photographed images into your camera. Plug
the AC power adapter connector into the DC
IN 3V socket on the camera and then plug
the adapter itself into the main power outlet.
2. Slide the power switch to the side to turn
the camera on.
3. Set the "USB MODE" setting in the
"SET–UP" menu to "DSC" (➡P.64, 65).
4. Slide the Power switch to the side to turn
80
the camera off.
ＯＦＦ
ＯＮ
ＤＳＣ ＤＳＣ ＤＳＣ ＤＳＣ ＤＳＣ
ＳＥＴ ＳＥＴ
ＢＡＣＫ ＢＡＣＫ ＢＡＣＫ
(Special USB)
socket
Camera
AC power adapter
5. Switch your PC on.
6. Use the special USB cable to connect the
camera to your computer.
7. Switch the camera on.
If you are using a Windows PC, the driver settings
are specified automatically when installation is
completed. No further action is required.
Always use the prescribed procedure when
disconnecting or switching off the camera
(➡P.86).
✽ On Windows XP and Mac OS X, you must specify the
automatic launch settings the first time you connect
the camera to your computer.
✽ Take care to ensure that the special USB cable is
connected the correct way around and that the plugs
are pushed fully into the connection sockets.
USB
PC
socket
✽ Sold separately