Use At Dsc Mode - FujiFilm FinePix S20 Pro Owner's Manual

6.1 CAMERA CONNECTION

USE AT DSC MODE

1
Set a camera
0 1
0 3
Ｓ Ｅ Ｔ − Ｕ Ｐ Ｓ Ｅ Ｔ − Ｕ Ｐ
Ｕ Ｓ Ｂ Ｍ Ｏ Ｄ Ｅ Ｕ Ｓ Ｂ Ｍ Ｏ Ｄ Ｅ
１ ３ ９ ４ Ｍ Ｏ Ｄ Ｅ １ ３ ９ ４ Ｍ Ｏ Ｄ Ｅ
Ｄ Ｉ Ｓ Ｃ Ｈ Ａ Ｒ Ｇ Ｅ Ｄ Ｉ Ｓ Ｃ Ｈ Ａ Ｒ Ｇ Ｅ
2
Connect a camera to a computer
USB socket
(mini-B)
DC IN 5V socket
IEEE1394 socket
100
2 0
３ ／ ３ ３ ／ ３
Ｏ Ｋ Ｏ Ｋ
Ｒ Ｅ Ｓ Ｅ Ｔ Ｒ Ｅ Ｓ Ｅ Ｔ Ｏ Ｋ Ｏ Ｋ
Camera
(USB) socket
Camera
IEEE
1394 socket
1 Insert the media with images into the camera.
2 Set the Mode dial to "
Power switch to "
ºª¶
3 Select "
in the SET-UP menu (➡P.83) and then turn the
camera off.
G
!
Use the AC Power Adapter AC-5VH/AC-5VHS (sold
separately) for the connection (➡P.98). If shutting off power
supply during communication, the files on the media may be
damaged.
G
!
If inserting a xD-Picture Card and a Microdrive into the
camera at the same time, images will be recorded onto the
media selected as the "MEDIA" (➡P.83).
1 Turn your PC on.
PC
2 Connect the camera to the PC using the USB
cable (mini-B) or IEEE 1394 cable.
3 Set the camera Power switch to "
G
!
Always use the cable provided with your camera. If you use
PC
other cable, your camera may not work correctly.
G
!
Make sure that the USB cable (mini-B) or IEEE 1394 cable is
connected correctly and is pushed in.
G
!
Do not connect the USB cable (mini-B) and the IEEE 1394
cable at the same time.
G
!
Connect your camera and a PC with the IEEE 1394 cable
only when the Power switch is set to "
If the Power switch is set to "
be extended.
h When the camera and computer are exchanging
data, the self-timer lamp blinks and the indicator
lamp blinks alternately green and orange.
≥
h "
" appears on the screen.
h Power save and Auto power off are disabled
during USB connection.
G
!
Before replacing the media, always disconnect the camera
from the PC using the procedure on P.102.
G
!
Do not disconnect the USB cable (mini-B) or IEEE 1394 cable
while communication is in progress. If shutting off power supply
during communication, the files on the media may be damaged.
W
" and then set the
q
".
" in "USB MODE" or "1394 MODE"
w
".
w
".
q
", the lens of the camera will