Use At Pc-Cam Mode - FujiFilm FinePix A200 Owner's Manual

7.3 Use at PC-CAM mode

ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＩＭＡＧＥ ＤＩＳＰＬＡＹ ＩＭＡＧＥ ＤＩＳＰＬＡＹ ＯＦＦ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ ＯＮ
ＵＳＢ ＭＯＤＥ
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
Plug the AC power adapter connector into the
DC IN 3V socket on the camera and then plug
the adapter itself into the main power outlet.
1. Slide the power switch to the side to turn
the camera on.
2. Set the "USB MODE" setting in the
"SET–UP" menu to "PC CAM" (➡P.64, 65).
3. Slide the power switch to the side to turn
the camera off.
✽ Select Macro mode for close-up shots (➡P.27).
E
Although the " " icon is not displayed.
ＯＦＦ
ＯＮ
ＰＣ ＣＡＭ
ＳＥＴ ＳＥＴ
ＢＡＣＫ ＢＡＣＫ ＢＡＣＫ
(Special USB)
socket
Camera
AC power adapter
4. Switch your PC on.
5. Use the special USB cable to connect the
camera to your computer.
6. Switch the camera on.
If you are using a Windows PC, the driver
settings are automatically specified when
installation ends. Just wait a few moments.
Always use the prescribed procedure when
disconnecting or switching off the camera
(➡P.86).
✽ Take care to ensure that the special USB cable is
connected the correct way around and that the plugs
are pushed fully into the connection sockets.
USB
PC
socket
✽ Sold separately
83
7