Printing Does Not Start - Canon imagePROGRAF iPF6400 Basic Manual

iPF6400

Printing does not start

Printing does not start
The Data lamp on the Control Panel does not light up .................................................................................. 99
The printer does not respond even if print jobs are sent ............................................................................ 99
Ink Filling.. is displayed .................................................................................................................................................. 99
The display screen indicates Agitating... .............................................................................................................. 99
The Data lamp on the Control Panel does not light up
The Data lamp on the Control Panel does not light up
Cause
The printer is not on.
The target printer was not
selected when printing.
The print job is paused.
The printer does not respond even if print jobs are sent
The printer does not respond even if print jobs are sent
Cause
In the Control Panel menu, Pause Print is On.
Ink Filling.. is displayed
Ink Filling.. is displayed
Cause
The printer was forced off during operation.
The display screen indicates Agitating...
The display screen indicates Agitating...
Cause
Ink agitation is in pro-
gress.
Basic Guide
Make sure the power cord is securely plugged in, all the way. Press the Power button to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try printing
again.
In Mac OS X, open the dialog box of the printer driver, select the printer from the list of Printer, and try
printing again.
In Windows, restart the print job as follows.
1.
Select the printer icon in the Printers and Faxes (or Printers) window.
2.
Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1.
Click Print & Fax. (This is identified as Printer Setup Utility or Print Center in other versions of Mac
OS X.)
2.
Select the printer, and then Resume Printer (or Start Jobs) in the Printers menu to restart the print job.
Set Pause Print to Off.
(See "Pausing Printing.")
Wait until the system has been filled with ink.
Please wait until ink agitation is finished.
The time for agitation varies depending on how long the printer has been off. (Between about 30 seconds and
two minutes.)
The Data lamp on the Control Panel does not light up
Corrective Action
Corrective Action
→User's Guide
Corrective Action
Corrective Action
99