End Of Paper Feed; Borderless Printng Not Possible - Canon imagePROGRAF iPF6400 Basic Manual

iPF6400
Cause
In other cases, the Cutter Unit
may be damaged.

End of paper feed.

End of paper feed.
Although an attempt was made to advance the paper manually, it reached the
limit position that can be advanced.

Borderless printng not possible.

Borderless printng not possible.

Cause
The print job received specifies a
type or width of paper that is not
compatible with borderless printing.
The loaded paper is a size not com-
patible with borderless printing.
Because paper expands or con-
tracts depending on the environment
of use, it may become narrower or
wider than the supported width for
borderless printing.
The paper is loaded askew.
Basic Guide
Contact your Canon dealer for assistance.
Cause
Follow these steps to change the settings of the print job to enable borderless printing.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide.
(See Paper Reference Guide .)
Select None when you have set Detect Mismatch on the control panel to Warning.
However, note that this error may cause paper jams and affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2.
Replace the paper with paper compatible for borderless printing.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper Refer-
ence Guide.
(See Paper Reference Guide .)
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Press the OK button to stop printing.
Use each type of paper only where the recommended environmental conditions are met. For de-
tails on environmental conditions for various paper, see the Paper Reference Guide.
(See Paper Reference Guide .)
Select None when you have set Detect Mismatch in the Control Panel menu to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Change Paper and straighten the paper so that the edges are between the
ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
For borderless printing on A1 (594 mm or 23.4 in) or A2 (420 mm or 16.5 in) rolls, attach the inclu-
ded Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
Select None when you have set Detect Mismatch in the Control Panel menu to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Corrective Action
Corrective Action
Canceling manual advancing.
(See "Feeding Roll Paper Manually.")
Corrective Action
→P.14
→User's Guide
→P.9
→P.11
→P.9
End of paper feed.
→User's Guide
127