12. Pass the cable through the hole as shown
in the figure, and connect it with [A].
13. Attach the cover and tighten the screws.
• Screws: 15 places
14. Insert its latch (E) and then the parts
indicated by the arrows as shown in the
figure.
Perform this operation with care to avoid
injury. In addition, be sure not to damage
the cover.
15. Insert the latches (A) and (B) of the cover.
• A: 2 places
• B: 2 places
7 / 9
A
E
A
A
B
B
GN-1060 with GN-3010