Set-Up; Power Save - FujiFilm FinePix 3800 Owner's Manual

POWER SAVE

SET–UP
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＰＯＳＴＶＩＥＷ ＯＮ ＰＯＳＴＶＩＥＷ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
hPower saving "OFF" (default setting)
The camera does not use measures such as
"sleep" to reduce power consumption. However, if
the camera is not used for approximately 2 minutes,
this function automatically switches the camera off.
hPower saving "ON"
Power consumption is kept to a minimum to
prevent battery depletion.
i If the camera is not used for approximately 30
seconds, the screen switches off temporarily
to reduce power consumption (Sleep mode).
i Once the camera is in Sleep mode, if it is left
unused for a further 90 seconds, it is
automatically switched off.
i The charging time for the flash increases
slightly because the flash charging power is
82
reduced.
ＯＦＦ
ＤＳＣ
ＳＥＴ
Bebeep
When the camera is in sleep mode, pressing the
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again. You can also take a picture by pressing
the shutter button all the way down.
●
!
Operation can also be restored by pressing buttons
other than the shutter button.
◆
To restore power to the camera
◆
Turn the Power switch to
"OFF" briefly and then
back to "q".