Camera Operation - FujiFilm FinePix 3800 Owner's Manual

■ Camera Operation

i When the camera and computer are exchanging
data, the self timer lamp blinks and the indicator
lamp blinks alternately green and orange.
i "DSC" appears on the screen.
i Power Save is disabled when the camera is
connected to a USB port.
✽ Before replacing the xD-Picture Card, always disconnect
the camera from the PC using the procedure on P.102.
✽ Do not disconnect the USB cable when the camera is
communicating with the PC. See P.102 for information
on the disconnection procedure.
■ PC Operation
Windows 98/98 SE/Me/2000 Professional
✽ The Windows CD-ROM may also be required
during installation. In this event, switch CD-ROMs
as directed by the on-screen instructions.
i FinePixViewer automatically starts up.
✽ Screen for
Windows 98 SE
i A removable disk icon appears and you can
use your PC to transfer files to and from the
camera.
Windows
If the above operations do not occur, you do not
have the required software programs or drivers
installed on your PC. Complete the required PC
setup procedures. Then reconnect the camera
to your PC.
Macintosh
7
97