Warning Displays - FujiFilm FinePix 50i Owner's Manual

Warning Displays

Warning Displayed
Remote
LCD Monitor
Controller
The camera battery is low on charge.
(Lit red)
No SmartMedia is loaded, or it is
loaded incorrectly.
• The SmartMedia is not formatted.
• The SmartMedia contact area is
soiled.
• Camera fault.
• The SmartMedia contact area is
soiled.
• The SmartMedia is damaged.
• The SmartMedia format is incorrect.
• Camera fault.
The SmartMedia is fully recorded.
The SmartMedia is write-protected.
• An attempt was made to playback a
frame not recorded on this camera.
• The SmartMedia contact area is
soiled.
• Camera fault.
The frame number has reached
999–9999.
116
e In Music mode, nothing is displayed on the LCD monitor.
Explanation Remedy
Replace or recharge the battery.
Load the SmartMedia (3.3V) in the correct
direction.
• Format the SmartMedia.
• Wipe the contact area on the SmartMedia with
a soft dry cloth.
• Contact your FUJIFILM dealer.
• Wipe the contact area on the SmartMedia with
a soft dry cloth. It may be necessary to format
the SmartMedia. If the error message is still
displayed, replace the SmartMedia.
• Contact your FUJIFILM dealer.
Erase some images or use a SmartMedia that
has ample free space.
Use a SmartMedia that is not write-protected.
• Images cannot be played back.
• Wipe the contact surface on the SmartMedia
thoroughly with a soft, dry cloth. In some cases,
you may have to format the SmartMedia.
• Contact your FUJIFILM dealer.
Switch the Frame No. Memory function to "RENEW"
and use a formatted SmartMedia to take the picture.
Warning Displayed
Explanation
Remote
LCD Monitor
Controller
• The data could not be recorded
due to a SmartMedia error or a
connection error between the
SmartMedia and camera.
• The photographed image cannot
be recorded as it is too large to fit
in the available space on the
SmartMedia.
• The voice caption file is faulty.
• Camera fault.
There is a strong likelihood of
— — camera shake because the shutter
speed is slow.
A protected frame was erased.
— —
Outside the AE continuous range.
— —
The AF (auto focus) cannot work
— — effectively.
There is a print order specified for
the image you attempted to erase.
— —
Remedy
• Re-insert the SmartMedia or switch the
camera off and then on again.
• Use a new SmartMedia.
• The voice caption cannot be played back.
• Contact your FUJIFILM dealer.
Use flash photography. However, a tripod
should be used for some scenes and modes.
Remove the protection and then erase the frame.
The exposure is not correct, but you can still
take the picture.
• If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture.
If you no longer need the image, erase it.
However, if you need the image, press the
"BACK" button to cancel image erasing.
117