Audio Recording Using The Remote Controller - FujiFilm FinePix 50i Owner's Manual

AUDIO RECORDING USING THE REMOTE CONTROLLER

1Connect the remote controller supplied with the camera (➡P.89).
2Set the Mode switch to "3" for recording and to "
3Ensure that the lens cover is closed when you switch the camera on (➡P.18).
P-MODE button
For recording
Text display
REC
Clip
HOLD switch
G
!
When HOLD is set, none of the buttons function. To use the remote controller, release HOLD.
G
!
Due to the nature of the LCD panel on the remote controller, the display may be difficult to see in cold locations or
98 at low temperatures. This is normal and does not indicate a fault.
2 " for playback.
button
button
button
For playback
Text display
STOP PLAY PAUSE
Volume adjustment
buttons
I Recording Audio files
Remote controller
operation
Record/Stop " @ " Functions in the same way as Record/Stop using the shutter button.
Set audio index
"P-MODE"
An audio index marker is set each time you press the button.
marker
I Playing Back Audio files
Remote controller
operation
Playback " @ " Plays back an audio recording.
i Pauses the recording when used during playback.
Pause/Resume " @ "
i Resumes playback if used when playback is paused.
Hold this button down for approximately 1 second to stop playback.
Hold down
✽ Pressing "
Stop
@
" "
back) to the next (or previous) file.
Hold down
Holding one of these buttons down for approximately 1 second or more
#"
"! " or "
Advance/Rewind during playback or while playback is paused advances or rewinds through
during playback or while
the audio file.
playback is paused.
Recall audio Press the button briefly to skip to the location of the next or previous audio
" ! #"
" or "
index marker index marker.
Set audio index
"P-MODE"
An audio index marker is set each time you press the button.
marker
Explanation
Explanation
! # " when playback is stopped skips forward (or
" or "
6
99