HP ENVY 17-2000 Getting Started Manual page 27

●
●
2. Put on your 3D glasses. If needed, adjust the glasses using the nose
pieces provided.
3. The 3D glasses turn on automatically when the 3D content begins to
play and the infrared (IR) signal is detected. Your lenses may
darken, or you may see flickering while the glasses start operation.
If you can see clearly in 3D, the setup is complete and you can
begin viewing 3D cinema content!
NOTE:
room and 3D Cinema Technology operate may cause flickering or
interfere with the operation of the glasses. This can be avoided by
dimming or turning off the lights.
WARNING!
glasses and stop using 3D Cinema Technology. Refer to the 3D
safety information and consult a physician if you suspect a physical
problem seeing stereoscopic 3D.
16 Chapter 2 Using HP 3D Cinema Technology
Double-click the 3D demo icon on the computer desktop and
select a 3D clip from the menu.
Insert a Blu-ray 3D movie (purchased separately) into the slot-
load optical drive on the computer and follow the on-screen
instructions.
Insert the disc into the optical drive until it clicks into
NOTE:
place. To eject the disc, press the optical drive eject key located
at the top right of the keyboard.
Differences in the frequencies at which the lighting in your
If you still cannot see 3D content, remove the 3D