Displaying Total Number Of Copies - Sharp AR-121E Operation Manual

Press the print (
3
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity (
4
parameter number will blink on the right of the display.
Program
No.
1
2
3
5
Factory default settings are indicated with an asterisk (*).
Press the print (
5
the entered value will be stored.
To change the setting or to set another mode, press the clear (
copier will return to step 2.
Press the light (
6

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
Press the clear (
1
Press and hold down the clear (
2
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
chap-4_AR121151EX.p65
) key. The entered program number will be steadily lit and the
Mode
Auto clear time
Preheat mode
Auto power shut-
off timer
Auto power shut-
off mode
) key. The right-hand number in the display will be steadily lit and
) or dark ( ) key to return to the normal copy mode.
) key to reset the display to zero.
) key for approximately 5 seconds. The total number
19
Parameters
0 OFF 1 30 sec. * 2
3 90 sec. 4 120 sec. 5
0 30 sec. 1 60 sec. * 2
0 2 min. * 1 5 min.
3 30 min. 4 60 min.
0 OFF * 1 ON
30/11/00, 19:08
USER PROGRAMS
) key. The entered
60 sec.
10 sec.
90 sec.
2 15 min.
5 120 min.
) key. The
19
4