Format; Frame No; Software Installation; The Software Components - FujiFilm FinePix A205 Owner's Manual

SET-UP

FORMAT

FRAME NO.

CONT. RENEW
A A
B B
Formatted xD-Picture Card used for both
A and B.
１００−０００９ １００−０００９
Directory number
File number
Frame number
５／３０／２００３ ５／３０／２００３
48
Formatting erases all the frames (files).
Initialize the xD-Picture Card for use in the
camera.
Copy important files onto your computer or another
media.
1 Press "d" or "c" to select "OK".
2 Press the "MENU/OK" button to erase all the
files and format the xD-Picture Card.
Formatting erases protected files also.
G
!
å ˚ ƒ
If the " " " " "
©
" " message appears before formatting
the media, refer to P.72 and take the appropriate measures.
CONT. : Pictures are stored beginning from the
highest file number stored on the last xD-
Picture Card used.
RENEW: Pictures are stored on each xD-Picture
Card beginning with a file number "0001".
Setting this function to "CONT." makes file
management easier as it ensures that file names
are not duplicated when images are downloaded to
a PC.
G
!
If the xD-Picture Card already contains image files with file
numbers higher than the highest file number on the last xD-
Picture Card, images are stored beginning from the highest
file number on the current xD-Picture Card.
Check the file number by viewing the image. The
last 4 digits of the 7-digit number in the top right
corner of the screen are the file numbers, while the
first 3 digits show the directory number.
G
!
To change the xD-Picture Card, always switch the camera
off before you open the battery cover. Opening the battery
cover without first switching the camera off, the camera may
no longer be able to maintain sequential frame numbers.
G
!
File No. run from 0001 to 9999. Once 9999 is exceeded, the
directory number changes from 100 to 101. The maximum
number is 999–9999.
G
!
The displayed frame number may differ for images
photographed on other cameras.
G
!
æ
If the " " message appears, see P.72.
5 Software
Installation
Connect the camera
with "¶" selected
as the USB setting
(➡P.60).
USB Mass Storage
Driver
Allows a digital camera to be used
" or
as USB Mass Storage (removable
disk drive, card reader).
FinePixViewer
Allows you to display thumbnail lists of the images stored on your PC or in the camera, print the images
individually or as an index, display the images at full size and perform some basic image processing.
PictureHello
Used for videoconferencing (Windows only).
R
Acrobat Reader (Macintosh only)
Software used to read PDF-format documents on a
personal computer. This software is needed to read
the User's Guides for FinePixViewer.
QuickTime
Software needed for playing back movies, etc.
✽ Note that the software configuration differs slightly depending on your operating system.

5.1 THE SOFTWARE COMPONENTS

Connect the camera
with "qPC " selected
as the USB setting.
Exif Launcher
Launches the FinePixViewer
software when a camera is
connected. Allows a digital camera to be
used as a PC Camera.
ImageMixer VCD
for FinePix CONVERTER LE
Creates a FinePix CD Album Used when you open RAW
(OS-X is not supported). files that were photographed
on cameras that support the
RAW file format.
R
FinePix A205/FinePix A210
is not supported for CCD-
RAW file.
USB PC Camera
Driver
RAW FILE
49