Installing The Print Heads And The Ink Tanks - Sharp AJ-6020 Operation Manual

INSTALLING THE PRINT HEADS AND THE INK
TANKS
This section describes how to install the print heads and ink tanks when you install
them for the first time after purchasing this unit. Refer to "THE INK TANK" (See
page 71) or "THE PRINT HEAD" (See page 73) when they need to be changed.
Make sure that the scan head locking switch is released.
1
Refer to step 3 of "UNPACKING". (See page 9)
Make sure that the power is on.
2
For the location of the "POWER" button (
Load paper following the steps shown in "LOADING PAPER".
3
(See page 20)
Turn the front cover locking knob with one hand and lift the
4
front cover with the other hand, while keeping the knob in the
unlocked position.
Keep the front cover open securely while installing print heads and ink tanks. You may
get your hand caught between the body and the front cover of the unit if you install
them with the front cover half open as shown in the illustration marked with an "X".
). (See page 46)
Do not move the
carriage manually by
force.
13