User Maintenance; The Ink Tank - Sharp AJ-6020 Operation Manual

USER MAINTENANCE

This chapter provides you with maintenance information. Follow the steps to change the ink
tanks or print heads and to clean or align the print heads by entering control panel
commands. The level of ink remaining for each ink tank can also be determined.
When the unit is connected to a computer, the maintenance commands can be made from
the computer. See "Maintenance" section on the Online Manual for details.

THE INK TANK

Changing the ink tank
When a message appears on the control panel informing that the ink is low in an ink tank,
copying can be continued, but it is recommended that the tank be replaced as soon as
possible. When the "ERROR" indicator lights and the message "Unable to Copy" is
displayed, the designated ink tank must be replaced.
Make sure that the power is on.
1
Open the front cover. (See page 13)
2
Open the maintenance cover. (See page 14)
3
Remove the old ink tank.
4
Press the tab to release the ink tank and remove the tank.
Example: Releasing the yellow ink tank
Unpack a new ink tank from its protective wrapping and slowly
5
remove the tape. (See page 15)
Insert the new ink tank. (See page 15)
6
Close the maintenance cover. (See page 16)
7
Close the front cover. (See page 16)
8
Press this tab.
71