Hardware And Software Requirements; Before Installation - Sharp AJ-6020 Operation Manual

HARDWARE AND SOFTWARE REQUIREMENTS

Check the following hardware and software requirements in order to install the AJ-6000
series drivers and software.
Computer type
Operating system
Display
Hard disk free space
Other requirement for hardware
*1
Compatible with Windows Me, Windows 98 or Windows 2000 preinstalled model with
USB interface equipped as standard.
*2
At least 800 x 600dots (SVGA) is required to use Sharpdesk.

BEFORE INSTALLATION

Follow the steps shown below to install software.
Install the AJ-6000 series drivers after confirming the operating
1
system installed on your computer.
Operating system
Windows Me
Windows 98
Windows 95
Windows 2000
Windows NT 4.0
Install the AJ-6000 series software, which includes Button
2
Manager, Copy JX2, SHARP TWAIN, Sharpdesk, and the Online
Manual. (See page 37 - 38.)
Install the printer driver.
3
Operating system
Windows Me
Windows 98
Windows 95
Windows 2000
Windows NT 4.0
Install the bonus software. (See page 45.)
4
26
IBM PC/AT or compatible computer equipped with a
*1
USB or bi-directional parallel interface (IEEE 1284)
Windows Me, Windows 98, Windows 95, Windows 2000,
Windows NT 4.0 (Service Pack 3 or later)
640 x 480dots (VGA) or better
80MB or more
An environment on which any of the operating
systems listed above can fully operate
Interface
USB/Parallel Installing onto Windows Me (See page 27)
USB/Parallel Installing onto Windows 98 (See page 28)
Parallel Installing onto Windows 95 (See page 29)
USB Installing onto Windows 2000 (USB interface)
(See page 31)
Parallel Installing onto Windows 2000 (Parallel interface)
(See page 32)
Parallel Installing onto Windows NT 4.0 (See page 33)
Interface
USB/Parallel Installing onto Windows Me/98/95
(See page 39)
USB/Parallel
Parallel
USB/Parallel Installing onto Windows 2000/NT 4.0
(See page 41)
Parallel
*2
Reference pages for how to install
Reference pages for how to install