Display Mode; Terminal Select - Sharp Aquos LC-20B6M Operation Manual

Display Mode

You can set the orientation of the picture.
1
Press MENU to display the Menu screen.
2
Press \/| to select "Setup".
3
Press '/" to select "Display mode", and press OK.
M e n u M e n u [ S e t u p : D i s p l a y
P i c t u r e S o u n d S e t u p F e a t u r e s
C H s e t u p
C l o c k
D i s p l a y
T e r m i n a l
A V 2 I n / O u t
P C s e t u p
L a n g u a g e
4
Press '/" to select the desired mode, and press OK.
M e n u [ S e t u p : D i s p l a y
M e n u
S e l e c t e d d e s i r e d
N o r m a l
M i r r o r
R o t a t e
U p s i d e d o w n
5
Press MENU to exit.
■
Directly setting the Display mode
Press DIS.MODE to display the Display mode screen.
• Each time you press DIS.MODE, the mode changes as follows.
Display mode [Normal]
Display mode [Upside down]
NOTE
• The Display mode screen automatically disappears after 4 seconds.
• The Display mode is set to "Normal" at the factory setting.
[Normal]: Normal image
orientation.
ABC
[Upside down]: To display upside
down images for special uses.
A B C
m o d e ]
s e t u p
m o d e
s e l e c t
m o d e ]
i t e m
Display mode [Mirror]
Display mode [Rotate]
[Mirror]: To display mirror
images for special uses.
C B A
[Rotate]: To display rotated
images for special uses.
ABC
Useful Features (Continued)

Terminal Select

You can select the input mode according to the external
device connected to the COMPONENT2/AV1 terminal.
1
Perform steps 1 and 2 in Display Mode to display the
Setup Menu screen.
2
Press '/" to select "Terminal select", and press OK.
M e n u [ S e t u p : T e r m i n a l
M e n u
P i c t u r e P i c t u r e S o u n d S o u n d S e t u p S e t u p F e a t u r e s F e a t u r e s
C H s e t u p
C l o c k
D i s p l a y
T e r m i n a l
A V 2 I n / O u t
P C s e t u p
L a n g u a g e
3
Press '/" to select the desired mode, and press OK.
M e n u [ S e t u p : T e r m i n a l
M e n u
S e l e c t e d d e s i r e d
C O M P O N E N T 2
A V 1
4
Press MENU to exit.
Selected item
COMPONENT2 COMPONENT2/AV1 terminals selected as
COMPONENT2 terminals.
AV1 COMPONENT2/AV1 terminals selected as AV1
terminals.
s e l e c t ]
s e t u p
m o d e
s e l e c t
s e l e c t ]
i t e m
Description
21