Preset; On-Screen Display Language Selection; Presetting The Channels (Auto) - Sharp Aquos LC-20B6M Operation Manual

Preset

On-Screen Display Language Selection

MENU on the LCD TV set can also be used to select the
language.
Upper control panel
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds to display the
PRESET mode screen.
Auto ( B/G )
VHF 1
48.25MHz
2
Press MENU (PRESET-1) twice to display the
LANGUAGE select mode screen.
• Press MENU (PRESET-1) again to change the
PRESET mode as shown below.
AUTO MANUAL
NOTE
• Instead of pressing MENU for more than 2 seconds, you can
display the LANGUAGE select mode by selecting "Language" in
"Setup" in the Menu screen. (see page 22).
E n g l i s h
3
Press CH ( )/(
display.
4
Press INPUT to return to the normal screen.
12
3 1, 2 4
LANGUAGE NORMAL SCREEN
) to select the language you wish to

Presetting the Channels (AUTO)

Automatically tunes in and presets receivable TV stations.
Make sure the antenna cable is properly connected.
Upper control panel
2
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
Sound System
A u t o ( B / G )
V H F 1
4 8 .2 5 M Hz
2
Press VOL (–)/(+) (PRESET-2) on the upper part of
the LCD TV set. All the TV stations in your area that
can be received by the LCD TV set are automatically
preset.
3
The screen shows whatever is on channel 1 when full
auto channel preset is finished.
NOTE
• When starting PRESET after setting the Sound system with MENU
on the remote control, the Sound system for all channels are stored
into memory.
• Unused channels are automatically skipped.
• The Preset mode is only available in the TV mode.
1
1
PAL
B/G