Input Signal Source - Sharp Aquos LC-30HV4M Operation Manual

Useful adjustment settings

Input signal source

Input selection
Can use for selecting the input source.
1
Press b on the remote control unit or
INPUT on the Display.
• INPUT SOURCE menu displays.
2
Press b on the remote control unit or
INPUT on the Display to select the input
source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
NOTE
• Some items may be greyed out. They are not selectable.
Input signal setting
For setting the signal type of external equipment.
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Option".
• Option menu displays.
3
Press a/b to select "Input Select", and then
press ENTER.
TV MENU
Option
Input Select
Audio Out
Cool Climate
Colour System
48
[Fixed]
[Off]
[AUTO]
4
Press a/b to select a signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, an image
does not display or no colour image displays.
For INPUT 1 signal
TV MENU
Option
Input Select
For INPUT 2 signal
TV MENU
Option
Input Select
For INPUT 3 signal
TV MENU
Option
Input Select
For INPUT 4 signal
TV MENU
Option
Input Select
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
AUTO
COMPONENT
S-Video
Video
AUTO
S-Video
Video
AUTO
COMPONENT
S-Video
Video
AUTO
S-Video
Video