Part names
AVC System
Front view
PC INPUT terminal (AUDIO)
STANDBY/ON indicator
X(POWER) button
* If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this
case, press CLEAR, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.
• AV MODE resets to USER.
• TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• SRS resets to OFF.
• Image position is initialised.
NOTE
• Pressing CLEAR will not work if the System is in standby mode (indicator lights red).
• Pressing CLEAR will not delete channel preset or password. See page 58 for clearing the password when you know it.
See page 71 for initialising to the factory preset values when you forget your password.
Rear view
VIDEO terminals
ANTENNA INPUT
terminal
INPUT 3
terminal
(S-VIDEO)
MONITOR OUTPUT terminal
(S-VIDEO)
MONITOR OUTPUT terminal (VIDEO)
MONITOR OUTPUT terminals (AUDIO)
INPUT 4 terminal (VIDEO)
PC INPUT terminal
(ANALOG RGB)
INPUT 4 terminal (S-VIDEO)
CLEAR*
INPUT 3
COMPONENT
INPUT 3 terminals
(AUDIO)
(Y, P
, P
)
B
R
INPUT 3
INPUT 1 terminal
terminal
(S-VIDEO)
(VIDEO)
INPUT 1 terminal
(VIDEO)
INPUT 2 terminals (AUDIO)
INPUT 2 terminal
(VIDEO)
INPUT 2 terminal (S-VIDEO)
Headphone
INPUT 4 terminals (AUDIO)
INPUT 1 COMPONENT
VIDEO terminals (Y, P
, P
B
R
INPUT 1 terminals
(AUDIO)
DISPLAY OUTPUT 1
RS-232C terminal
DISPLAY OUTPUT 2
terminal
DC OUTPUT terminal (Terminal for
expanded functionality in the near future.)
(When connecting headphones,
the sound from the speakers is
muted.)
(How to open the door)
)
terminal
AC INPUT terminal
11