Watching Broadcasts Via An Hdtv Tuner; Connecting An Hdtv Tuner; Displaying Broadcasts Via An Hdtv Tuner - Sharp Aquos LC-30HV4M Operation Manual

Using external equipment

Watching broadcasts via an HDTV tuner

Connecting an HDTV tuner

You can use the INPUT 3 terminal when connecting an HDTV tuner and other audiovisual equipment.
AVC System (rear view)
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
TV MENU
Option
Input Select
AUTO
COMPONENT
S-Video
Video
(For INPUT3 signal)
AV cable (commercially available)
S-video cable
(commercially available)
Component cable
(commercially available)

Displaying broadcasts via an HDTV tuner

To watch an HDTV tuner image, select "INPUT3" from
"INPUT SOURCE" menu using b on the remote
control unit or INPUT on the Display.
Then select "INPUT3" on "Input Select" in the menu to
set the correct input signal type. (See page 48.)
The setting is stored and can be selected in the "INPUT
SOURCE" menu.
NOTE
• Each time b is pressed, the input source toggles.
• If the HDTV tuner image does not come in clearly, you
may need to change the input signal type setting on the
"Input Select" menu.
When using component
cable, select
"COMPONENT" for
"Input Select" in the
menu.
HDTV tuner
41