Watching Broadcasts Via An Hdtv Tuner; Connecting An Hdtv Tuner; Displaying Broadcasts Via An Hdtv Tuner - Sharp LC-30HV2M Operation Manual

Using external equipment

Watching broadcasts via an HDTV tuner

Connecting an HDTV tuner

You can use the INPUT 3 terminal when connecting an HDTV tuner and other audiovisual equipment.
AVC System (rear view)
ANT
ANT/CABLE 75Ω
MONITOR OUTPUT
COMPONENT COMPONENT
Y P P Y P
B R B
INPUT 3
S-VIDEO VIDEO R-AUDIO-L S-VIDEO VIDEO R-AUDIO-L
AV cable
(commercially available)
S-video cable
(commercially available)
MENU
Option
Input Select
Input3 [AUTO]
AUTO
AV-Y/C
COMPONENT
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Component video cable
(commercially available)
P
R
INPUT 1
RS-232C DISPLAY OUTPUT-1
DISPLAY OUTPUT-2
INPUT 2

Displaying broadcasts via an HDTV tuner

When connecting to the INPUT 3 terminals, select
"INPUT3" and set the correct input signal type on "Input
Select" in the menu. (See page 52.)
The setting is stored and can be selected on the
"INPUT SOURCE" menu.
To watch an HDTV tuner image, select "INPUT3" from
the "INPUT SOURCE" menu using b on the remote
control unit or INPUT on the Display. (See page 52.)
A
• Each time b is pressed, the input source toggles.
• If the HDTV tuner image does not come in clearly, you
may need to change the input signal type setting on the
"Input Select" menu.
When using component
video cable, select
"COMPONENT" for
"Input Select" in the
menu.
AC INPUT
110-240V
HDTV tuner
45