Staple - Ricoh 7025 Operating Instructions Manual

Note
❒ To cancel this function in step
sure the indicator goes off.
❒ When placing an original on the exposure glass, start with the first page to
be copied. When placing an original in the ARDF, set so the last page is on
the bottom.
❒ If you copy using this function and select the paper can be shift-sorted, the
machine automatically outputs copies (including single page jobs) to the
Finisher Shift Tray, even if another output tray is specified in the User
Tools menu. For details about this function , see "Supplementary Informa-
tion".
Reference
See p.18 "Specifying the Original Size When the Bypass Tray is Selected".
"Copier Features: Rotate Sort", General Settings Guide
"Copier Features: Rotate Sort: Auto Continue", General Settings Guide
"Copier Features: Auto Tray Switching", General Settings Guide
"Tray Paper Settings: Paper Type: Tray 2", General Settings Guide

Staple

Each copy set can be stapled together.
If a finisher is installed, each time the copies of one page are delivered, the next
copy is shifted when delivered so you can separate each job by page.
Important
❒ You cannot use the bypass tray with this function.
❖ Stapling position and original setting
Place all the originals in the ARDF in the orientation in which they can be read
normally. When placing the original on the exposure glass, keep the same ori-
entation, but set the original facing downwards. When there is copy paper
that is identical in size and orientation to your original, the staple positions
are as follows:
, press the {Sort/Staple} key again. Make
A
Copy Functions
2
49