4.2
STAPLE MODE
[Fig. 2]
[Fig. 1]
[Fig. 3]
When the final set of copies is jogged [Fig. 1], the staple unit staples the
stacked copies as follows: The grip arms move inside the front side plate and
catches the paper. The bin rear plate is turned so as to be flat with the sorter
bin. The grip assembly brings the copies down underneath the stapler [Fig.
2]. The staple unit changes the position (the position varies depending on the
copy size and staple mode) and the stapler staples the copies [Fig. 3].
FT6645/6655/6665
4-10
STM