Frymaster RESERIESMARINE E4 Installation & Operation Manual page 19

2. Inspect the filter pan connection fitting
to ensure that both O-rings are in good
condition. The O-rings are located on
the tube disconnect inside the filter pan
as shown on the drawing down and to
the right.
3. Place the metal filter screen in the center
of the bottom of the pan, then lay a sheet
of filter paper on top of the pan, over-
lapping on all sides.
4. Position the hold-down ring over the
filter paper and lower the ring into the
pan, allowing the paper to fold up
around the ring as it is lowered to the
bottom of the pan.
5. When the hold-down ring is in position,
sprinkle one cup of filter powder evenly
over the paper.
6. Replace the crumb tray in the filter pan,
and then push the filter pan back into the
fryer, positioning it under the drain.
Inspect O-Rings
Screen
Filter Paper
4-2