Frymaster PERFORMANCE PRO SERIES 45 Service And Parts Manual page 68

ITEM PART #
1 230-1178
2 230-1180
3 826-1155
810-1001
807-1906
4 810-1862
5
826-1353
826-1354
810-0407
812-1203
6
810-1830
6A 106-1908SP
6B 106-1909SP
810-0426
810-0427
806-8688SP
106-9570
106-1911
810-2071
806-8689SP
106-9571
106-1912
810-2070
7 823-5295
823-5296
823-0574
826-2109
826-2110
826-2111
8
810-2007
810-2022
807-3485
810-1873
9 810-0705
812-0278
10
807-1603
807-4137
807-1604
807-3294
807-3295
810-0786
810-0787
* 810-0691
NOTE: A gas valve capacitor (P/N 806-4781) is required on gas valves used on units with thermostat controllers.
Metal Target Sides, Individual
Metal Target Rear, Individual
Ignitor (see Section 2.14.3)
Ignitor Kit, Optional Piezo
Trigger/Ignitor
Electrode Assembly
Burner Manifold, Full-vat (full assembly including targets, 106-5075SP)
Orifi ces (for high altitude and special gasses contact Frymaster)
1.7 mm, Natural Gas (pkg. of 10)
1.05 mm, Propane/Butane Gas (pkg. of 10)
2.15 mm, Manufactured Gas
1.00 mm, Butane Gas
Pilot Assemblies, Non-CE
Natural Gas with Thermopile (Twin Push-on Terminals, 45) (Pro- 810-7773)
Natural Gas with Thermopile (Twin Spade Terminals, 35)
Pro./But. Gas with Thermopile (Twin Spade Terminals, 35)
Natural Gas - Pilot Only (MJ45)
Pro./But Gas - Pilot Only (MJ45)
Pilot Assemblies, CE and Export
Natural Gas with Thermocouple (Co-axial Lead)
Natural Gas with Thermocouple Australia (Co-axial Lead)
Natural Gas, Australian (Co-axial Lead)
Natural Gas, mV
Pro./But. Gas with Thermocouple (Co-axial Lead)
Pro./But. Gas with Thermocouple, Australia (Co-axial Lead)
Pro./But. Gas, Australian (Co-axial Lead)
Pro./But. Gas, mV
Burner Heat Shield Assemblies
Filter Burner Position, Left (includes bracket, 210-9729)
Filter Burner Position, Right (includes bracket, 210-9729)
Non-fi lter Burner Position (includes bracket, 930-0075)
Kit, Retrofi t Filter Lid (includes 823-5295 and 823-5296, see Page 2-29)
Kit, Retrofi t Filter Lid, LH Spreader (includes 823-5295, see Page 2-29)
Kit, Retrofi t Filter Lid, RH Spreader (includes 823-5295, see Page 2-29)
Thermopile/Thermocouple
Pilot, Natural Gas
Pilot, LP Gas
Thermopile, Generator with Adaptor (for use with 810-2007, 810-2022) PMJ35
Thermopile 1TT (Non-CE Pilot Assemblies, push on terminals) PMJ45
Tube, Pilot Gas (Use with all burner assemblies except Hong Kong export units.)
Tube, Pilot Gas (Use with Hong Kong export units only.)
Gas Valves, Non-CE (see note below)
mV Natural Gas
mV Natural Gas (Australia) also requires kit 807-1846
mV Propane Gas
24V Natural Gas (for 240V, use 807-0025)
24V Propane Gas (for 240V, use 807-0759)
E. I. Natural
E. I. Propane
Tube, Vent
2-29
COMPONENT