Frymaster PERFORMANCE PRO SERIES 45 Service And Parts Manual page 66

ITEM PART #
5
826-1357
826-1387
810-0407
812-1203
6
810-1873
807-3485
106-1909SP
806-8688SP
106-9570
106-1911
810-2071
806-8689SP
106-9571
106-1912
810-2070
7
823-5295
823-5296
823-0574
826-2109
826-2110
826-2111
8
810-2007
810-2022
807-3485
810-1873
810-3442
826-1527
810-1723
9 810-0705
812-0278
10
807-1603
807-4137
807-1604
807-3294
807-3295
810-0786
810-0787
11
806-6710
806-6711
806-7101
806-7102
*
806-5895
806-5896
806-5897
806-5894
* 806-4781
* 810-1183
* 826-2554
NOTES: 1. A gas valve capacitor (P/N 806-4781) is required on gas valves used on units with thermostat controllers. 2. An adapter kit (P/N 812-
1256SP) is required to connect the high-limit thermostat to Item 11. It is included with Item 6 on Page 2-40.
Orifi ces (for high altitude and special gasses, contact Frymaster)
1.45 mm, Natural Gas (pkg. of 10)
.86 mm, Propane/Butane Gas (pkg. of 10)
2.15 mm, Manufactured Gas
1.00 mm, Butane Gas
Pilot Assemblies, Non-CE
Natural Gas with Thermopile (Twin Push-on Terminals)
Natural Gas with Thermopile (Twin Spade Terminals)
Pro./But. Gas with Thermopile (Twin Spade Terminals)
Pilot Assemblies, CE and Export
Natural Gas with Thermocouple (Co-axial Lead)
Natural Gas with Thermocouple Australia (Co-axial Lead)
Natural Gas, Australian (Co-axial Lead)
Natural Gas, mV
Pro./But. Gas with Thermocouple (Co-axial Lead)
Pro./But. Gas with Thermocouple, Australia (Co-axial Lead)
Pro./But. Gas, Australian (Co-axial Lead)
Pro./But. Gas, mV
Burner Heat Shield Assemblies
Filter Burner Position, Left (includes bracket, 210-9729)
Filter Burner Position, Right (includes bracket, 210-9729)
Non-Filter Burner Position (includes bracket, 930-0075)
Kit, Retrofi t Filter Lid (includes 823-5295 and 823-5296, see Page 2-29)
Kit, Retrofi t Filter Lid, LH Spreader (includes 823-5295, see Page 2-29)
Kit, Retrofi t Filter Lid, RH Spreader (includes 823-5295, see Page 2-29)
Thermopile/Thermocouple
Pilot, Natural Gas, Honeywell
Pilot, LP Gas, Honeywell
Thermopile, Generator with Adaptor (for use with 810-2007 & 810-2022)
Thermopile 1TT, Spade Terminals (Non-CE Pilot Assemblies)
Thermocouple Assembly (CE)
Kit, Thermocouple with Adapter (CE Pilot Assemblies)
Thermocouple Adapter (CE Pilot Assemblies)
Tube, Pilot Gas (Use with all burner assemblies except Hong Kong export units.)
Tube, Pilot Gas (Use with Hong Kong export units only.)
Gas Valves, Non-CE (see Note 1 below)
mV Natural Gas
mV Natural, Australia (Requires kit 807-1846 to use Propane)
mV Propane Gas
24V Natural Gas (for 240V, use 807-0025)
24V Propane Gas (for 240V, use 807-0759)
E. I. Natural
E. I. Propane
Gas Valves, CE
24V Natural Gas (see Note 2 below)
24V Propane Gas (see Note 2 below)
mV Natural Gas
mV Propane Gas
Mount Assembly (Ignitor, Electrode/Flame Sensor, Mount Plate)
Natural Gas, Right
Natural Gas, Left
Pro./But. Gas, Right
Pro./But. Gas, Left
Capacitor
Tee, ¼" Brass Compression
Millivolt Switch
2-27
COMPONENT