LG PA45** Owner's Manual page 79

Pa45/pa49/pa65 series
Hide thumbs Also See for PA45**:
Table of Contents

Advertisement

Setting
Country
Selects a desired country.
(Except for Israel)
Hard of Hearing
This function is for the blind, and provides explanatory audio describing the current situation in a
(
) (In Digital
TV programme in addition to the basic audio.
mode only)
Additional Audio
This function is for the blind and provides explanatory audio describing the current situation in a
Selection(This
TV programme in addition to the main audio.
menu is enabled
Option
only in New Zea-
None
land.)
Audio Description
Clean Audio
Spoken Subtitle
ISM Method
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image
remaining even when you change the image. Avoid allowing a fixed image to remain on the
screen for prolonged periods.
Option
Normal
Orbiter
Colour Wash
Data Service
This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at
(This menu is ena-
the same time.
bled only in South
Africa, Malaysia.)
Factory Reset
This function initializes all settings.
In Lock System "On", if you forget your password, press '0', '3', '2', '5' on
y
the remote control handset.
Set ID
Adds an ID to the connected devices
Mode Setting
Default selection is "Home Use". We recommend setting the TV to "Home Use" mode for the best
picture in your Home environment.
Option
Home Use
Store Demo
Demo Mode
Main audio
for the visually impaired(contains a spoken description of the visual content
of the service.)
for the hearing impaired(the dialogue is concentrated on the centre channel.)
for the visually impaired(contains the main audio with a spoken rendition of
the subtitle.)
Sets it If image sticking is never a problem,
Orbiter may help prevent ghost images. However, it is best not to allow any
fixed image to remain
on the screen. To avoid a permanent image on the screen, the screen will
move every 2 minutes.
The colour block with the screen moved a little and the white pattern are
alternately displayed. It is difficult to sense the afterimage occurred while the
temporary afterimage is removed and the colour pattern is operating.
NOTE
Selects it for the Home environment.
Selects it for the retail environment.
Sets to show special features of the TV. You can cancel the demo mode by
pressing any buttons except the Volume and Mute buttons.
NOTE
It is not possible to use Demo Mode in Home Use mode.
y
In Store Demo, Demo Mode is automatically set to On.
y
Once Demo Mode is set to Off in Store Demo, Demo Mode
y
does not run and only the screen is reset.
The screen is reset automatically after 5 minutes in Demo
y
Mode.
CUSTOMIZING SETTINGS
Description
79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents