LG PA45** Owner's Manual page 42

42
PENTOUCH
Pairing for the First Time
1
Check that the LED indicator on the dongle
connected to the computer is red.
2
Keep the touch pen within 30 cm of the dongle.
3
Press the
(Power)
once.
4
The LED indicator on the touch pen will red for
2 seconds and blinks green 3 times when pair-
ing is complete.
5
If the LED indicator is red for 4~5 seconds and
blinks red 3 times, pairing is not successful.
Please try pairing again.
6
Once a pen is paired, the red LED blinks once
when you press the Touch Home button.
When Pairing Fails
1
Pairing fails if the dongle driver is not installed
on the computer.
2
Pairing fails if the LED indicator on the dongle
is not red.
3
Remove the dongle from the PC, reinsert it and
try pairing.
Unpairing (Resetting touch pen)
1
Press the Touch Home button on the touch pen
and check that the red LED blinks once.
2
Press the Touch Home button and the
er) button together, regardless of sequence, for
more than 4 seconds.
3
If you release the buttons after 4 seconds, the
pen will be reset. The red LED will blink three
times and the pen will be turned off.
Caution When Unpairing
1
Be careful not to unpair the pen by mistake. If
unpaired, try pairing it again.
2
If you unpair and pair a normally functioning
touch pen, the other paired pen may not work.
In this case, unpair the nonfunctioning touch
pen and pair it again by following the steps de-
scribed in the Pairing for the First Time section.
button on the touch pen
(Pow-
Touch pen Operation
Once paired, you can use the touch pen in the
following ways.
1
Powering on
- Press the (Power)
and green LEDs will remain lit to indicate that
the power is on.
2
Powering off
- Press the (Power) button for more than 3
seconds and release it. The red LED will blink
3 times and the pen will be turned off.
3
Pressing the Touch Home button while using
the touch pen
- In the Pentouch program:
the toolbar of the feature.
- In Windows: Works in the same way as the
right-click function.
Point the touch pen at an object you want to
right-click, then press the button.
4
The double-click function may not work as
intended in Windows XP or Windows Vista.
If this is the case, use the Touch Home button
(right-click) instead.
5
The touch pen works in the same way as the
mouse in Windows.
button once. The red
Shows or hides