LG PN45 Series Owner's Manual
Hide thumbs
Also See for PN45 Series:
- Owner's manual (215 pages) ,
- Owner's manual (86 pages) ,
- Owner's manual (36 pages)
Related Manuals for LG PN45 Series
Summary of Contents for LG PN45 Series
- Page 1 OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. PN45** PN65* P/NO : MFL67648602 (1305-REV03) www.lg.com Printed in Korea...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS SAFETy INSTRUCTIONS SPECIFICATIONS INSTALLATION PROCEdURE LICENSES ASSEMBLING ANd PREPARING OPEN SOURCE SOFTWARE NOTICE Unpacking Separate purchase Parts and buttons ExTERNAL CONTROL dEvICE Lifting and moving the TV SETUP Setting up the TV - Attaching the stand - Detaching the stand Mounting on a table Mounting on a wall... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS SAFETy INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING y Do not place the TV and/or remote control y Insert power cable plug completely into in the following environments: wall socket otherwise if not secured - A location exposed to direct sunlight completely into socket, fire ignition may - An area with high humidity such as a... - Page 4 SAFETY INSTRUCTIONS y Do not drop the product or let it fall over y Do not drop metallic objects such as when connecting external devices. coins, hair pins, chopsticks or wire into Otherwise, this may result in injury or the product, or inflammable objects such damage to the product.
- Page 5 SAFETY INSTRUCTIONS y If any of the following occur, unplug the y If you install the TV on a stand, you need product immediately and contact your to take actions to prevent the product from local service centre. overturning. Otherwise, the product may - The product has been impacted by fall over, which may cause injury.
- Page 6 SAFETY INSTRUCTIONS y Signal from Remote Control can be interrupted due to external/internal lighting y Prevent dust collecting on the power plug eg Sunlight, fluorescent lighting.If this pins or outlet. occurs turn off lighting or darken viewing This may cause a fire hazard. area.
- Page 7 SAFETY INSTRUCTIONS y When unplugging the cable, grab the plug y The panel is a high technology display and unplug it, by pulling at the plug. Don’t product with resolution of two million to six pull at the cord to unplug the power cord million pixels.
-
Page 8: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. - Page 9 ASSEMBLING AND PREPARING desk-mount Screw Power Cord Holder Power Cord (Only 42PN45**) (Depending on model) (Depending on model) See p. 17 (See p. 20) Screw for assembly Screw for assembly Stand Body / Stand Base 7 EA, M4 x 14 7 EA, M5 x 16 (See p.
- Page 10 ASSEMBLING AND PREPARING NOTE y The items supplied with your product may vary depending on the model. y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. How to use the ferrite core - If there are two ferrite cores, follow as shown in Figures 1-2 and 2-1(or 2-2).
- Page 11 ASSEMBLING AND PREPARING NOTE y Antenna Isolator Installation Guide - Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. » If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.
-
Page 12: Separate Purchase
ASSEMBLING AND PREPARING Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. LG Audio Device Compatibility PN45** PN65** LG Audio Device •... -
Page 13: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons Screen Speakers Remote control sensor Buttons Power indicator Button description Turns the power on or off. Selects the highlighted menu option or confirms an input Accesses the main menus, or saves your input and exits the menus. Changes the input source Adjusts the volume level. -
Page 14: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the Tv y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the Please note the following advice to prevent the TV as shown in the following illustration. TV from being scratched or damaged and for safe transportation regardless of its type and size. -
Page 15: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the Tv Image shown may differ from your TV. Attaching the stand Only 50PN45**, 50/60PN65** 3 EA M5 x 16 Only 42PN45** 3 EA M4 x 14 Stand Body Front Only 50PN45**, 50/60PN65** 4 EA M5 x 16 Only 42PN45** Stand Base... -
Page 16: Detaching The Stand
ASSEMBLING AND PREPARING detaching the stand (Only 50PN45**, 50PN65**) CAUTION y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. y Make sure that the screws are inserted correctly and fastened securely. -
Page 17: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table Adjusting the angle of the Tv to suit view Lift and tilt the TV into its upright position on (This feature is not available for all models.) a table. Adjusting the angle of the TV to suit view Leave a 10 cm (minimum) space from Swivel 20 degrees to the left or right and adjust the wall for proper ventilation. - Page 18 ASSEMBLING AND PREPARING Securing the Tv to a wall WARNING (This feature is not available for all models.) y If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: »...
-
Page 19: Mounting On A Wall
If you install the TV on a ceiling or slanted materials, please contact qualified personnel. wall, it may fall and result in severe injury. Use an authorized LG wall mount and LG recommends that wall mounting be contact the local dealer or qualified performed by a qualified professional installer. -
Page 20: Tidying Cables
ASSEMBLING AND PREPARING / MAKING CONNECTIONS MAKING CONNECTIONS Tidying cables Install the Power Cord Holder and Power This section on MAKING CONNECTIONS Cord. It will help prevent the power cable from mainly uses diagrams for the PN45** models. being removed by accident. Connect various external devices to the TV and Gather and bind the cables with the Cable switch input modes to select an external device. -
Page 21: Antenna Connection
MAKING CONNECTIONS Antenna Connection HdMI Connection Connect the TV to a wall antenna socket with an Transmits the digital video and audio signals from RF cable (75 Ω). an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. -
Page 22: Dvi To Hdmi Connection
MAKING CONNECTIONS Component Connection dvI to HdMI connection Transmits the digital video signal from an external Transmits analog video and audio signals from device to the TV. Connect the external device and an external device to the TV. Connect the exter- the TV with the DVI-HDMI cable as shown. -
Page 23: Composite Connection
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the exter- nal device and the TV with th e composite cable as shown. AUDIO IN (PC) AUDIO IN (PC) AV IN 2 L/MONO AV IN 2 L/MONO... -
Page 24: Audio Connection
MAKING CONNECTIONS Audio Connection USB Connection Connect a USB storage device such as a USB You may use an optional external audio system instead of the built-in speaker. flash memory, external hard drive, or a USB memory card reader to the TV and access the My media menu to use various multimedia files. -
Page 25: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batter- ies (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. - Page 26 REMOTE CONTROL Only PN65** POWER Turns the TV on or off. Tv/RAd Selects Radio, TV and DTV programme. RATIO Resizes an image. AV MODE RATIO INPUT INPUT Changes the input source. Av MOdE Selects an AV mode. Number buttons Enters numbers. LIST Accesses the saved programme list.
-
Page 27: Using The User Guide
USING THE USER GUIDE USING THE USER GUIdE User Guide allows you to more easily access the detailed TV information. Press SETTINGS to access the main User Guide OPTION > To set language menus. Press the RED button to access the SETTINGS ... -
Page 28: Maintenance
MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning your Tv Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. -
Page 29: Environmental Information
ENVIRONMENTAL INFORMATION ENvIRONMENTAL INFORMATION (India only) WEEE disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the e-waste (Management and Handling) Rules, 2011. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. -
Page 30: Specifications
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 42PN45** 50PN45** MOdELS 42PN4500-TA 50PN4500-TA With stand (mm) 983.6 x 650.3 x 250.0 1168.0 x 755.4 x 292.7 Dimensions (W x H x D) - Page 31 SPECIFICATIONS Digital TV Analogue TV Television DVB-T PAL/SECAM-B/G/D/K, PAL-I Zealand, System Singapore BG : VHF/UHF 1 to 69, CATV 01 to 47 Programme UHF 21 to 69 I : VHF/UHF 1 to 69, CATV 01 to 47 Coverage DK : VHF/UHF 1 to 69, CATV 01 to 47 Australia Television DVB-T...
- Page 32 SPECIFICATIONS HdMI/dvI-dTv supported mode Component port connecting information Horizontal vertical Component ports on the Resolution Frequency Frequency (kHz) (Hz) 720x480 31.469 59.94 31.5 Video output ports 720x576 31.25 on DVD player 1280x720 37.5 44.96 59.94 1920x1080 33.72 59.94 33.75 28.125 Signal Component 26.97...
-
Page 33: Licenses
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. - Page 36 (Only DTV) Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
-
Page 37: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... - Page 38 KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Q.Menu CH +, PR + R/C Button R/C Button CH -, PR - List, - (ATSC Only) R/C Button R/C Button Volume + List...
- Page 39 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 40 (TV) (PC) EXTERNAL CONTROL DEVICE SETUP (TV) (PC) RS-232C IN Phone jack Type (CONTROL & SERVICE) (TV) (PC) • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and RS-232C IN (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual.
-
Page 41: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... - Page 42 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 43 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) 04. Volume Mute (Command: k e) ► To control Power *On or Off of the set. ► To control volume mute on/off. You can also adjust mute using the MUTE button Transmission[k][a][ ][Set ID][ ][Data][Cr] on remote control.
- Page 44 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) ► To adjust the screen tint. ► To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64...
- Page 45 EXTERNAL CONTROL DEVICE SETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 00 : xx (Don't care) Data 02 : Input Source (Digital)
- Page 46 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number 20. Control Back Light (Command: m g) Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data ► To control the back light. - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) Transmission [m][g][ ][Set ID][ ][Data][Cr] [Data 03][Data 04]: Minor/Branch Channel Number...
- Page 47 11 11 EXTERNAL CONTROL DEVICE SETUP 22. 3D(Command: x t) (only 3D models) 07 : 3D Sound Zooming 08 : Normal Image View (Depending on model) 09 : 3D Mode (Genre) ► To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [Data 01] It has own range for each 3D option determined by [Data 00].