LG PA45** Owner's Manual page 71

Advanced image options
Setting
Colour Gamut Advanced Control
Maximizes the utilization of colour to increase colour quality.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
Expert Control
Displays colour domain of the signal.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
xvYCC *This feature is not available for all models.
(available in Cinema This is produces richer colours.
and Expert mode) This feature represents rich colours as much as a conventional video signal.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted
through HDMI.
Colour Filter
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Expert Pattern This is the pattern used for expert adjustment
(available in Cinema This function is enabled in "Picture Mode - Cinema, Expert" when you watch DTV.
and Expert modes)
Colour Temperature
Adjusts the overall colour of the screen by changing the white baseline.
a. Method : 2 Points
y
y
y
Colour Management As the tool used by the experts to make adjustments by using the test patterns, this does not
System affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/Blue/
Yellow/Cyan/Magenta).
Colour difference may not be distinctive even when you make the adjustments for the general
video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
Red/Green/Blue/Yellow/Cyan, Magenta Colour: The adjustment range is -30 - +30.
Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.
This feature is disable in RGB-PC and HDMI-PC mode.
Pattern: Inner, Outer
Ponto: High, Low
Red/Green/Blue: The adjustment
range is -50 to +50.
CUSTOMIZING SETTINGS
Description
b. Method : 20 Point IRE
IRE (Institute of Radio Engineers) is the unit to
y
display the size of the video signal and can be set
among 5, 10, 15 - 100 Plasma TV. You can adjust
Red, Green or Blue according to each setting.
Red/Green/Blue: The adjustment range is -50 to
y
+50.
c. Apply to all inputs
71