Playback; Playing Back A Tape On The Lcd Screen - Samsung SC-D371 Owner's Instruction Book

ENGLISH

Playback

Playing Back a Tape on the LCD Screen

✤ The Playback function and speaker works only in <Player> mode.
➥page 19
✤ You can monitor the playback picture on the LCD Screen.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
(SC-D375(H)/D975 only)
3. Insert the tape you wish to view. ➥page 32
4. Open the LCD Screen.
I
Adjust the angle of the LCD Screen and set the
brightness or color if necessary.
5. Press the [œ œ œ œ (REW)] button to rewind the tape to the
starting point.
I
To stop rewinding, press the [I (STOP)] button.
I
The Camcorder stops automatically after rewinding is
completed.
6. Press the [√ √ ❙❙ (PLAY/STILL)] button to start playback.
I
You can view the picture you recorded on the LCD
Screen.
I
To stop the play operation, press the [I (STOP)]
button.
Adjusting the LCD Bright/LCD Color during
Playback
✤ You can adjust the LCD Bright/LCD Color during
playback.
✤ The adjustment method is the same procedure as used
in <Camera> mode. ➥page 29
Adjusting the Volume
✤ When you use the LCD Screen for playback, you can
hear recorded sound from the built-in Speaker.
- Take the following steps to lower the volume or mute
the sound while playing a tape on the Camcorder.
✤ When sound is heard once the tape is in play, use the
[... ... / † † ] button to adjust the volume.
I
A volume level display will appear on the LCD
Screen.
I
Levels may be adjusted from anywhere between
<00> to <19>.
I
If you close the LCD Screen while playing, you will not hear sound from
the speaker.
✤ When the Audio/Video cable is connected to the Camcorder, you cannot
hear sound from the Built-In Speaker and cannot adjust the volume.
60 60
✤
<Player> (
✤
5 6
√ 0:46:00:11
SP
60min
[05]
✤
)
1. [PLAYER]
2. [TAPE]
SC-D375(H)/D975)
➥ 32
3.
4.
I
[œ œ œ œ (REW)]
5.
I
,
I
[√ √ II (PLAY/STILL)]
6.
I
I
,
✤
✤
<Camera> (
➥ 29
✤
-
✤
I
I
00 19
I
➥ 19
[I (STOP)]
[I (STOP)]
)
,
L / M
,