Connecting A Power Source; About The Operating Modes - Samsung SC-D371 Owner's Instruction Book

ENGLISH
Preparation

Connecting a Power Source

✤ There are two types of power source that can be connected to your
Camcorder.
- The AC Power Adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household power source to use the
Camcorder without having to worry about the
battery power. You can keep the Battery Pack
attached; the battery power will not be consumed.
1. Turn the [Power] switch to [OFF].
2. Connect the AC Power adapter (AA-E9 TYPE)
to a wall socket.
I
The plug and wall socket type may differ
according to your resident country.
3. Connect the DC cable to the DC jack of the
Camcorder.
4. Set the Camcorder to each mode by holding down the tab on the [Power]
switch and turning it to the [CAMERA] or [PLAYER] mode.

About the Operating Modes

✤ The operating modes are determined by the position of the [Power] switch
and the [Mode] switch.
✤ Set the Operation Mode by adjusting [Power] switch and [Mode] switch
before operating any functions.
Mode Name <Camera Mode>
<Player Mode>
[Power] Switch
[Mode] Switch
(SC-D375(H)/D975
only)
✤ M.Cam Mode : Memory Camera Mode / M.Player Mode : Memory Player
Mode
✤ The <M.Cam Mode> and the <M.Player Mode> are only enabled on
SC-D375(H)/D975.
✤
Power Switch
✤
✤
<M.Player
<M.Cam Mode>
Mode>
D375(H)/D975
✤ <M.Cam Mode>
1. [Power]
2. AC Power
3.
4.
[PLAYER]
[Power]
[Power]
[Mode]
SC-
SC-D375(H)/D975
[OFF]
(AA-E9 )
[Power]
[CAMERA]
[Mode]
[Power] [Mode]
<M.Player Mode>
19 19