Recording With Ease For Beginners (Easy.q Mode) - Samsung SC-D371 Owner's Instruction Book

ENGLISH
Basic Recording

Recording with Ease for Beginners (EASY.Q Mode)

✤ The EASY.Q function works only in <Camera> mode. ➥page 19
✤ The EASY.Q function allows a beginner to easily make good
recordings.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
(SC-D375(H)/D975 only)
3. By pressing the [EASY.Q] button, all functions on
the Camcorder will be set to off and the recording
settings will be set to the following basic modes:
I
The words <EASY.Q> and <DIS (
displayed at the same time.
4. Press the [Start/Stop] button to start recording.
I
Recording will begin using the basic automatic
settings.
5. Press the [EASY.Q] button again in the STBY mode
and then turn the EASY.Q mode off.
I
The EASY.Q function will not turn off while you
are recording.
I
The Camcorder will return to the settings that
were set prior to activating EASY.Q mode.
[ Notes ]
I
Unavailable buttons during operation
During operation EASY.Q, the following buttons are
unavailable because the items are automatically set.
The corresponding messages may appear if
unavailable operations are attempted.
- MENU button
- C.NITE button
- Q.MENU button
I
The EASY.Q mode settings are deleted when the
Battery Pack is removed from the Camcorder and
must be reset when the Battery Pack is replaced.
I
Taking a still image using the [PHOTO] button while EASY.Q is set
releases DIS function.
1
)> are
3
STBY
(
✤
<Camera> (
✤
1. [Power]
2. [Mode]
SC-D375(H)/D975)
3. [EASY.Q]
I
(
4. [Start/Stop]
I
5.
I
I
I
0:00:10
SP
60min
MENU
C.NITE
Q.MENU
I
I
[PHOTO]
)
➥ 19
)
[CAMERA]
[TAPE]
<EASY.Q> ( ) <DIS (
)
[EASY.Q]
EASY.Q
)>
35 35