Connecting To An External Source; Cd Digital Out Jack; Speaker Connection - Samsung MM-B9 Instruction Manual

Micro component audio system
Hide thumbs Also See for MM-B9:
Table of Contents

Advertisement

Connecting to an External Source

GB
The auxiliary input can be used to take advantage of the
sound quality of your micro component system when listening
to other sources.
Examples:
A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
1
Set the system to standby mode and disconnect it and the external
source from the main.
2
Connect the audio cable to the rear of the micro component system.
Connect the...
Red jack
White jack
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the main socket and press On/Standby
(
) to switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
Switch the external source on.
6
Adjust the volume and balance as required:
Volume
Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).

CD Digital Out Jack

This unit can output CD digital sound signals through this jack. Use
an optical cable to connect digital audio equipment.
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the CD DIGITAL OUT jack. Then,
connect an optical cable plug to the CD DIGITAL OUT jack.
(1)
When the CD DIGITAL OUT jack is not being used.
Attach the supplied dust cap.
8
To the connector marked...
R (right)
L (left)
S.Bass

Speaker Connection

The System has Main Speaker jacks and Subwoofer Speaker
jacks.
Main Speaker Connection: Connect the Main Speaker cords
(red/black) to the Main Speaker jacks of
the System
Subwoofer Speaker Connection: Connect the Subwoofer Speaker
(Right Speaker)
+
+
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
cords (blue/black) to the
Subwoofer Speaker jacks of the
System
(Left Speaker)
+
+

Advertisement

Table of Contents
loading

Table of Contents