Programming The Order Of Playback; Checking Or Changing Programmed Tracks; Tuner - Samsung MM-B9 Instruction Manual

Programming the Order of Playback

You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 24 order of tracks desired to listen
may be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD
Repeat function.
1
If the CD function is selected, stop the player by pressing
2
Load the selected CDs.
3
Press Program/Set.
Result: The following indications are displayed:
(01 = Program no., -- -- = Track no. on the disc)
4
Select the required track by pressing:
to move back through the tracks
to move forward through the tracks
5
Press Program/Set to confirm your selection.
Result: The selection is stored and is displayed.
6
To select other tracks, repeat Steps 4 to 5.
7
Press CD ( ) to listen to the track selection in the order programmed.
8
To...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards
one or more tracks
9
To cancel the selection, press
Once if the compact disc player is stopped
Result: PROGRAM is no longer displayed.
If you open the compartment, the selection is cancelled.
You can also use the
tracks in step 4, 8.
REV.
CD SYNC.
Mode
1, 9
Repeat
3,5
Program/
Set
4,8
button .
Press...
once
twice
once
or the appropriate
number of times
button.
/ buttons to select the required
RDS
Display PTY
CD
+10
7
Band
VOL.
4,8
Tuning
Mode
VOL.
Checking or Changing Programmed
Tracks
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press Program/Set button twice.
Result: The following indications are displayed:
(01 = Program no., – – = Track no. on the disc)
If you have already programmed 24 tracks, Check is displayed
instead of P when you press Program/Set.
3
Press Program/Set one or more times until the track to be changed
is displayed.
4
Press or to select a different track.
5
Press Program/Set to confirm your change.
6
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.

TUNER

/Band
C D
TAPE
4
Tuning Mode
4
1
REV.
CD SYNC.
Mode
1
2,3,5
Repeat
Program/
4
Set
Power Sound
Surround Mode
Sleep
Open/Close
Mono/ST
S.Bass
Level
Multi Jog
4
TAPE
RDS
Display PTY
CD
+10
6
Band
VOL.
4
Tuning
Mode
VOL.
GB
13