Safety Precautions; Cleaning Your Micro Component System - Samsung MM-B9 Instruction Manual

Safety Precautions

GB
The following diagrams illustrate the precautions to be taken
when using or moving your micro component system.
Volume
TUNER /Band Power Sound
Demo REC/Pause Surround Mode
On/Standby
C D
CD Synchro Sleep
TAPE
AUX Open/Close
CD Repeat Mono/ST S.Bass
Level
Tuning Mode
Multi Jog
Phones
MIC MIC Mixing
Ambient operating conditions:
Ambient temperature
Humidity
TUNER /Band Power Sound
Demo REC/Pause Surround Mode
On/Standby
C D
CD Synchro Sleep
TAPE
AUX CD Repeat Mono/ST Open/Close
S.Bass
Level
Tuning Mode
Multi Jog
Phones
MIC MIC Mixing
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.
22
TUNER /Band
Demo REC/Pause
On/Standby
C D
CD Synchro
TAPE
AUX CD Repeat
Tuning Mode
Phones
MIC MIC Mixing
Do not expose the unit to direct sun
5°C-35°C radiation or other heat sources.
10-75% This could lead to overheating and
malfunction of the unit.
Volume
TUNER /Band Power
Demo REC/Pause Surround
On/Standby
C D
CD Synchro Sleep
TAPE
AUX
CD Repeat Mono/ST
Tuning Mode
Phones
MIC MIC Mixing
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to light-
ning could damage the unit.
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
TUNER Power Sound
Demo REC/Pause /Band Surround Mode
On/Standby
C D
CD Synchro Sleep
TAPE
AUX Open/Close
CD Repeat Mono/ST
Tuning Mode
Phones
MIC MIC Mixing
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
Cleaning Your Micro Component
System
To obtain the best possible results from your micro compo-
nent system, you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Always unplug the system from the wall outlet:
Volume
Power Sound Outer Casing
Surround Mode
Sleep
Mono/ST Open/Close
S.Bass
Level
Clean the outer casing regularly using a soft cloth and a light detergent. Do
Multi Jog
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
Compact Disc Player
1
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
2
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
1
Volume
Press Push Eject(
Sound
Mode
Open/Close
S.Bass
Level
Multi Jog
2
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
VOLUME
UP
DOWN
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
Volume
S.Bass
Level
Multi Jog
Before cleaning it
If you are not going to be using it for a long time
) to open the cassette deck.
3
1 2